High quality mounting kit for fitting the 4gen
2500 front bumper to 2gen body including also comparatible high quality lightbar with mounting brackets in low-cost package price. Includes all the needed parts for
conversion (except bumper). Unlike in most other competitors
products, you don't need any other brackets, because this product is
mounted directly to bumper.
When 4gen bumper is mounted to the
2gen body, there's a wide gap between bumper and the body. This kit
includes coverplate to cover that gap so the result of the conversion
looks stylish. Cover plate is mounted to bumper brackets.
Mounting
brackets has "double bolt pattern" on the frame side, so brackets fits
both older (94-95) and newer (96-02) bodies. Brackets are also
adjustable on frame side as well in bumper side, so it's possible to
adjust bumper to correct position.
In addition brackets has
towingrings and oval holes for easier lightbar mountings. Brackets also
has holes for light bar cable routing and cutouts for cable ties to hold
cable on it's place.
Mounting brackets are manufactured of 4mm S650 high strength steel,
so the brackets are light and strong. Brackets are painted black with
durable paint. Coverplate is made of aluminium and it has not been
coated (so that it's possible to paint it to same color with the bumper).
Besides the bumper mounting brackets, coverplate, lightbar and it's mounting brackets this kit includes also all hardware needed to mount these.
Lightbar in this kit is high quality Optibeam Pioneer 1100 which has excellent luminous power. It's built of high
quality components and approved for road use in EU. We chose lightbar for this kit which "we would buy for ourselves" also. In this auxiliary LED lightbar are all the most important
chosing criterias combined: Excellent luminous power, great beam
pattern, high quality and good price-quality ratio. For us it is
important, that all our products are high quality and durable. So we
will give 24 month quarantee to this lightbar.
There are lots of
auxiliary lights on the markets which are advertised by high
theoretical powers and luminous powers. Although in reality all that
really matters is the actual luminous power and especially the beam
pattern. Even high luminous power is not much of the use in auxiliary
light if it is only a bright spot right in front of the vehicle and
in top of the trees. As well light with indefinite beam pattern is
practically not usable in snowy or foggy weather, because of the high
reverse reflection. Cheap price in auxiliary light made of poor
quality components may fire back soon in the form of darkened and
dimmed leds.
Technical
specifications for the lightbar:
- Reference
number: 50
- Operating voltage: 9-36V
- Nominal power: 220W
(22x10W LED)
- Nominal luminous flux: 20 900 lm
- Colour
temperature: 6500K
- Parking light function
- Dimensions:
L1099 x H56 x W73 mm
- 2-pin DTP connector (counter socket also
included)
- Durable aluminium housing
- Impact-resistant
Lexan ™ polycarbonate lens
- Includes both end brackets and
slidable bottom brackets
- Breather valve
- ECE
R112 and R10 approvals
- Approved for road use in EU (check your
local regulations)
- Warranty: 24 months
- IP68
This kit is designed and manufactured in Finland (except the lightbar).
We keep this
product in stock, but if it happens to be out of the stock, will
delivery time be normally about one month.
